Need help?Do you have a question about the Atlantic Navilink A75 and is the answer not in the manual?
General| Brand | Atlantic |
|---|---|
| Model | Navilink A75 |
| Category | Temperature Controller |
| Language | English |
Specifications and diagram for the Navilink A78 controller.
Specifications and diagram for the Navilink A75 controller.
Explains symbols on the Navilink display and their meanings.
Details symbols for operation modes and heat source production.
Identifies the Menu button, navigation knob, and back button on the controller.
Step-by-step guide on how to navigate through the device's menus.
Instructions on using the knob and buttons to change settings.
Advice on sensor placement to ensure good transmission and avoid interference.
Visual guide on how to open the sensor casing.
Instructions for installing batteries in the Navilink A78, emphasizing polarity.
Details cable types and steps for connecting cables to the Navilink A75.
How to affix the Navilink A78 sensor bracket to the wall.
How to affix the Navilink A75 sensor bracket using a mounting box.
Introduction to pairing room sensors with the HP unit.
Steps to pair a single room sensor with the heat pump.
Procedure for pairing two room sensors with the heat pump.
Instructions on pairing sensors with the CozyTouch accessory.
Using the "Easy Start" function for initial appliance settings during pairing.
How to select the zone number for the paired sensor.
Steps for Wi-Fi pairing when a single sensor is installed.
Steps for Wi-Fi pairing when a second sensor is installed.
How to temporarily override the timer program for a specific duration.
Direct method to adjust settings from the main welcome screen.
How to choose a zone from the menu to apply manual settings.
How to stop an active exemption for a single heating zone.
How to stop an active exemption for two heating zones.
Guide to enabling the DHW boost function for rapid hot water heating.
Explains heat pump priority and when boost stops.
How to set the start and end dates for the holiday period.
How to define the reduced temperature for the dwelling during the holiday.
Accessing and changing programmed holiday periods.
How to cancel a holiday period that is currently active.
Explains how the "Active Functions" page shows operating services and their status.
Details the status of "Indoor Comfort" and "Zone 1/2" functions.
How to set temperature levels for Comfort and ECO periods.
Displays the default heating and cooling temperature settings.
Step-by-step guide to setting up daily heating or cooling schedules.
Instructions on how to copy a programmed schedule to other days.
How to remove or reset a defined Comfort period.
How to view energy usage for heating, cooling, and hot water.
How to view oil usage for heating and hot water.
How to access and change the display language of the controller.
How to rename zones for easier identification.
Connecting the sensor to another Navilink device.
Connecting the sensor to the CozyTouch accessory.
Connecting the sensor to a signal repeater.
Explanation of security keys for io-homecontrol® network.
Procedure for sending a security key to other devices.
Procedure for receiving a security key from other devices.
Description of the io-homecontrol® RCM advanced function.
How to reset all paired device connections.
How to monitor the radio signal quality of the device.
Shows how electricity and oil costs are displayed.
Information on the IHM and controller software versions.
How to calibrate the sensor's temperature reading.
To Next Page
