What to do if my Atlantic Heater does not heat?
If your Atlantic Heater isn't heating, and you're using a schedule, first ensure the scheduler is in COMFORT mode. Next, check your installation circuit breakers to make sure they haven't tripped. If you have a load shedding device, verify it hasn't cut off the radiator's power. Also, check the room's air temperature; if it's too high, the heating symbol won't appear.
Why my Atlantic R4GVD-T2S Heater does not heat enough?
If your Atlantic Heater isn't heating enough, increase the set temperature for Comfort mode. If it's already at maximum, check if another heating mode is active in the room. Make sure the radiator is only heating the room by keeping the door closed. Have the device's power supply voltage checked. Also, verify that your radiator's power output is suitable for the room size, with a suggestion of 100W/m² for a 2.50m ceiling height.
What to do if my Atlantic R4GVD-T2S Heater heats all the time?
If your Atlantic Heater is heating constantly, make sure the radiator isn't in a draft. Also, check to see if the temperature settings have been inadvertently changed.
How to fix an Atlantic Heater that doesn't follow the external scheduler?
To fix an Atlantic Heater that isn't following the external scheduler's orders, verify that the scheduling unit is being operated correctly. Also, check that the scheduler is correctly positioned in its housing and is functioning normally, paying attention to the status of the batteries and fuse. Ensure that your device is in schedule mode and that the external centralized schedule is set to the correct day of the week.
Why is my Atlantic R4GVD-T2S Heater very hot on the surface?
If your Atlantic Heater's surface is very hot, it could be due to a significant difference between the ambient room temperature and the set temperature. After the radiator has stabilized for 6 hours, adjust it by pressing and holding the and buttons for 3 seconds. Then, adjust the temperature difference using the or keys, and confirm with the key.
How to prevent smudges on walls around my Atlantic Heater?
To prevent smudges on the walls around your Atlantic Heater, check the room's ventilation (ventilation, air intake, etc.) and air quality. Avoid smoking inside the room.
Specifies essential guidelines and safety precautions for installing the device correctly.
Step-by-step instructions for securely mounting the wall bracket.
Electrical connection procedures, including power supply and wiring requirements.
Overview of different heating modes (Comfort, Eco, etc.) and their appropriate usage.
Detailed instructions on how to use and adjust the Comfort heating mode.
Instructions for operating the radiator in Eco mode for energy saving.
Guidance on using the programmed mode for scheduled heating.
Detailed guide for setting up custom heating programs via the device's interface.
Steps to access the main programming menu for setting schedules.
Solutions for common problems encountered with the radiator's operation.
To Next Page
General