Atlantis LinePower 1151 - User Manual

Atlantis LinePower 1151

71 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

Table of Contents

Questions and Answers

J
jonathan27Aug 9, 2025
Why is the icon flashing on the LCD display of my Atlantis LinePower 1151 and the alarm sounding every second?
- L
  Lisa DavisAug 9, 2025
  This issue with your Atlantis UPS could be due to a couple of reasons. First, the line and neutral conductors of the UPS input might be reversed. Try rotating the mains power socket by 180° and then reconnecting it to the UPS system. Alternatively, the external or internal battery might be incorrectly connected. Ensure that all batteries are properly connected.
A
Amy DavidsonAug 25, 2025
How to fix an Atlantis LinePower 1151 with no indication or alarm when the mains is normal?
- E
  emily54Aug 25, 2025
  If your Atlantis UPS shows no indication and no alarm even when the mains power is normal, there are a couple of things to check. First, make sure the AC input power cord is firmly connected to the mains. Second, verify that the AC input is correctly plugged into the AC input, and not the UPS output.

Atlantis LinePower 1151 Specifications

General

Apparent Power	1150 VA
Real Power	690 W
Operating Temperature	0-40°C
Input Voltage	230 V
Output Voltage	230 VAC
Topology	Line Interactive
Typical Backup Time at Full Load	3 minutes
Communication	USB
Typical Recharge Time	4-6 hours
Humidity	0-95% non-condensing