ACTA 4000 User Guide Programming ACTA
9836 4171 01 2008-12 33 (136)
Viewing ISO 5393 calibration results
The tightening and result of the ISO 5393 calibration is stored in the database within the four tools used.
To see the result in ACTA (only torque and angle):
Open
Stat>Statistics torque>right arrow/left arrow to view the ISO5393 statistics torque dialog box
and
Stat>Statistics angle>right arrow/left arrow to view the ISO5393 statistics angle dialog box.
To see the complete result, do the following:
Print the result by selecting
Print>ISO 5393.
Transfer the data to a PC with ToolsTalk QAT.
To Next Page
Loading...
