Atlas Copco Battery 18V

Battery 18V, Battery 36V EN Operation
© Atlas Copco Industrial Technique AB - 9839 2028 01
7
Operation
Operating Instructions
Battery Health and Charge Display
The battery capacity is dependent on the battery model and the type of work performed with the tool.
The indicator is located on the connector plate of the battery, and is also shown on the tool LED light indi-
cator. Press the battery release button to view the status.
The battery health is only indicated on the battery itself. The battery indicator on the LED light indica-
tor only indicates the battery charge, not health.
When the battery is connected to a charger, the state of health (SOH) and the state of charge (SOC) will
glow for 5 seconds before starting the charge pattern.
Battery State of Health
The SOH is shown by the battery outline of the battery indicator:
Battery light Battery health Remark
Green Good Battery is healthy and performing well
Yellow Decreased Battery will eventually need to be replaced
Red Low Replace the battery
Battery State of Charge
The SOC is shown by the bars in the battery indicator and shows five levels:
Level
Battery bar indica-
tor Battery status Remark
1 3 white Full charge
2 2 white Medium charge