This product has been manufactured under a quality management system certified to ISO 9001:2015
Declaration of Conformity
Atlas Copco Vacuum Belgium n.v.
Industrielaan 40
B-3730 Hoeselt
Belgium
Documentation Officer
Innovation Drive
Burgess Hill
West Sussex
RH15 9TW
documentation@vt.atlascopco.com
This declaration of conformity is issued under the sole responsibility of the manufacturer.
The product specified and listed below
• Vacuum pump
• GVS 220A Air-cooled “Europe” (4kW,50Hz / 4.8kW,60Hz)
• GVS 220A Air-cooled “World” (4,5kW,50Hz / 5,5kW,60Hz)
• Pump family codes :
• 30026150x
Where
x can be 10 to 13, 56, 57
defining their variants
The object of the declaration described above is in conformity with relevant statutory requirements:
Supply of Machinery (Safety) Regulations 2008
The objectives of the Electrical Equipment (Safety) Regulations 2016 are governed by Annex 1 1.5.1 of this regulation.
Electromagnetic Compatibility Regulations 2016
Class A Emissions, Industrial Immunity
Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012
Based on the relevant requirements of harmonised standards:
Compressors and vacuum pumps. Safety requirements. Vacuum pumps
Safety of machinery. Electrical equipment of machines. General requirements
Electromagnetic Compatibility (EMC) - Part 6-2: Generic Industrial Immunity Standard
Electromagnetic Compatibility (EMC) - Part 6-4: Generic Industrial Emission Standard
This declaration, based on the requirements of the listed Statutory Instruments and EN ISO/IEC 17050-1, covers all
product serial numbers from this date on: 2021-11-09
You must retain the signed legal declaration for future reference
This declaration becomes invalid if modifications are made to the product without prior agreement.
Signed for and on behalf of Atlas Copco
Andries de Bock - VP Engineering
Industrial Vacuum Division
Cologne
François Bouillot - General Manager
Product Company Valence
To Next Page
Loading...
