Maintenance, precautions
WARNING Fuel spill hazard
When the machine is laid down, there is a risk of fuel
spill. This may lead to fire, which can cause injury.
► Make sure that the machine is laid down
horizontally, with the front side down. It must not
differ more than 40 mm (1.6 in.) from the rammer
shoe to the top of the machine.
WARNING Machine modification
Any machine modification may result in bodily injuries
to yourself or others.
► Never modify the machine. Modified machines are
not covered by warranty or product liability.
► Always use original parts and accessories
approved by Atlas Copco.
► Change damaged parts immediately.
► Replace worn components in good time.
CAUTION High temperature
The machine's engine exhaust pipe, and bottom
become hot during operation. Touching them can
lead to burns.
► Never touch a hot machine.
► Never touch the bottom of the machine when its
hot.
► Wait until the engine, exhaust pipe, and bottom of
the machine have cooled down before carrying
out maintenance work.
Storage, precautions
♦
Keep the machine in a safe place, out of the reach
of children and locked up.
© 2011 Atlas Copco Construction Tools AB | No. 9800 1139 01 | 2011-04-01
Original instructions
10
LT 800Safety and operating instructions
To Next Page
Loading...
Need help?
General
