Atlas Copco LTV 37 SR002-L13-TS User Manual

LTV38 R..TS/..TAS
Printed Matter No.9836 1857 00 Angle nutrunner
2017-01-20
Original Product instructions
LTV 37 SR007-10-TS (13 - 27 Nm) 8431 0544 02
LTV 37 SR006-10-TS (18 - 32 Nm) 8431 0544 03
LTV 37 SR002-L13-TS (40 - 85 Nm) 8431 0544 04
LTV 37 SR005-10-TS (20 - 42 Nm) 8431 0544 70
LTV 37 SR005-13-TS (20 - 42 Nm) 8431 0544 73
LTV 37 SR004-10-TS (28 - 50 Nm) 8431 0544 88
LTV 37 SR004-13-TS (28 - 50 Nm) 8431 0544 96
LTV37 SR004A-13-TS (30 - 60 Nm) 8431 0544 97
LTV37 SR003-13-TS (34 - 70 Nm) 8431 0544 99
LTV37 SR007-10-TAS (13 - 27 Nm) 8431 0560 05
LTV37 SR006-10-TAS (18 - 32 Nm) 8431 0560 06
LTV37 SR005-10-TAS (20 - 42 Nm) 8431 0560 07
LTV37 SR004-10-TAS (28 - 50 Nm) 8431 0560 08
LTV37 SR004-13-TAS (28 - 50 Nm) 8431 0560 09
LTV37 SR003-13-TAS (34 - 70 Nm) 8431 0560 10
LTV37 SR002-L13-TAS (40 - 85
Nm)
8431 0560 11
LTV37 SR005-13-TAS (20 - 42 Nm) 8431 0560 72
LTV37 SR004A-13-TAS (30 - 60
Nm)
8431 0560 74
WARNING
To reduce risk of injury, everyone using, in-
stalling, repairing, maintaining, changing acces-
sories on, or working near this tool MUST read
and understand these instructions before per-
forming any such task.
DO NOT DISCARD - GIVE TO USER

Atlas Copco LTV 37 SR002-L13-TS Specifications

General

Brand	Atlas Copco
Model	LTV 37 SR002-L13-TS
Category	Power Tool
Language	English

Summary

Notice and Safety Instructions

Notice

Important notes regarding environmental factors affecting the tightening process and required checks.

Safety Instructions

General guidance on safe operation, handling, and precautions before using the machine.

Warning

Crucial safety advice, emphasizing familiarization with instructions and disconnecting power for adjustments.

Safety Information and Technical Details

Installation of Vibrating Tools

Recommendation for installing a minimum length of flexible hose for compressed air with vibrating tools.

General Information

Includes EC Declaration of Conformity and harmonised standards applied to the product.

Air Quality Recommendations

Guidance on optimal compressed air quality, filters, and dryers for tool performance and longevity.

Compressed Air Connection

Details on the recommended working pressure and connection procedures for compressed air supply.

Handling and Torque Adjustment

Instructions for proper handling and detailed steps for setting the tightening torque using the clutch spring.

Verification of Tightening Torque

Recommended equipment and methods for verifying the accuracy of the tightening torque.

Calibration Value and Transducers

Information on calibration values for torque and angle transducers, and machine memory storage.

Machine Memory Contents

Details on the types of information stored in the machine's memory, including calibration and serial numbers.

Signal Lights Indicators

Explanation of the machine's signal lights indicating the status of torque and angle readings.

Machine Calibration Procedures

Factory calibration process, recommended recalibration intervals, and checking machine performance.

Calibration Procedure using FOCUS and IRTT

Step-by-step guide for calibrating the tool using FOCUS and IRTT instruments.

Maintenance and Cleaning

Guidance on lubrication, cleaning, rust protection, and inspection for optimal tool performance.

Service Instructions

Instructions for regular overhaul, preventive maintenance, and part replacement.

Lubrication Guide

Specifics on lubricating gears, valve, and clutch with recommended molybdenum disulphide greases.

Ergonomic Guidelines

Guidelines for setting up workstations to ensure user comfort, safety, and efficient work.

Technical Data: Noise and Vibration

Summary of technical specifications including noise and vibration emission data and declaration statement.

Tightening Torque Range and Monitoring

Explanation of torque range, air pressure monitoring via RE-signal S1, and tightening threaded connections.

Testing Tightening Torque and Components

Methods for testing tightening torque, checking valve play, and selecting test joints/transducers.