8. All
regulating and safety devices shall be maintained with due care to ensure that they function properly.
They may not be put out of action.
9. Before clearing the device for use after maintenance or repair, check that operating pressures, temperatures
and time settings are correct. Check that all control and shut-down devices are fitted and that they function
correctly.
10. Make sure that no tools, loose parts or rags are left in or on the device.
11. Never use caustic solvents which can damage materials of the device.
Also consult following safety precautions: Safety
precautions during installation and Safety
precautions during operation.
These precautions apply to electrical devices.
For precautions applying to the connected equipment consult the relevant instruction book.
Some precautions are general and cover several machine types and equipment; hence
some statements may not apply to your machine.
Units and/or used parts should be disposed of in an environmentally friendly and safe
manner and in line with the local recommendations and legislation.
Instruction book
AIF999999 5
To Next Page
Loading...
Need help?
General
