Atlas Copco Service Products
To maintain the highest standard of quality in your assembly oper-
ation, you need reliable tools that perform efciently at all times.
We offer customized service solutions depending on the size, tool
type and demands in your operation.
– ToolScan RCM
Is your tool service level correct? Based on the Reliability-
centered Maintenance (RCM) process, ToolScan RCM enables
our service experts to identify your precise needs in terms of
tool service. We'll help you optimize your existing service
program or, if necessary, develop a new one.
– Full Coverage Service Agreements
Our full coverage option that includes everything needed for
your tools even corrective maintenance. You delegate all service
of your new or old tools to Atlas Copco at a xed cost. Repairs
required during the contracted period will be free of charge,
unless the tool has been misused.
– Preventive Maintenance Agreements
Our standard preventive maintenance program. Atlas Copco
will maintain your equipment in peak condition for a specied
number of years at a xed cost, with full documentation.
– Fixed Price Repairs
A xed price repair program that ensures faster turn-arounds
and cuts administration costs at every level. Combined with
our Service Box concept, it results in further reductions in ad-
ministration and handling costs.
– ToolScan™
Identify problems before they occur. Ask for Tool-Scan™ and
an experienced Atlas Copco service engineer will check the
status of your tools on-site for a xed price. A full report of
the ndings on each tool is provided after every ToolScan™.
– Calibration Services
Let us handle your tool and equipment calibration. We have
experienced personnel, state-of the-art equipment, and accred-
ited calibration laboratories operating in compliance with ISO
17025 standards.
– ToolStart
We offer tool installation and start-up by qualied Atlas Copco
engineers at a xed price. The service also includes: Program-
ming, test running, and operator training.
– Training
Atlas Copco offers a wide range of training and seminar pro-
grams relating to tools, systems and software. Courses start
with a theoretical platform, and lead to instruction on practical
implementation in your business.
For more information about these services, please contact your
Atlas Copco service sales representative.
Our Service Box concept cuts administration and handling costs.
Service Kits
Even the best tool needs maintenance and overhaul. Continous
industrial use in tough working environments wear out some parts.
Before a tool breaks down it loses power and becomes less pro-
ductive. A gradual change can be difcult to detect. Atlas Copco
Service Kits will give new life to your tool.
Everything you need to recondition your tool is contained in
just one Kit. Instead of replacing an individual part i.e vanes, as
they wear out, recondition the entire tool with an Atlas Copco
Tools Service Kit. This will guarantee a good function of your
tool and added assurance of dependability.
Service tools
The service tools which should be used to facilitate rational and
fast overhauling are listed in Service instructions and in the ex-
ploded views.
Service boards and service tool sets
Besides the recommended service tools, for this specic machine,
we can offer complete service boards with service tool sets. As
optional equipment we can also offer a "Board cabinet" which
suits the Service Boards. Boards and cabinet are in a yellow colour.
The size of the boards is 980x960x1.5mm.The boards are equipped
with tool holders, transparent lm with black silhouettes of the
service tools (brackets to assemble the boards on the wall incl.)
For more information please read Atlas Copco Service News
concerning Service boards and tools, Ordering No. 9835 5485 00.
Technical data
Noise and vibration emission
dB(A)Noise (according to PN8NTC1.2)
89Measured sound pressure level
102Determined sound power level
3Spread in method and production
m/s
2
Vibration (according to ISO 8662-2)
< 2.5Measured vibration value
Spread in method and production
Declaration of noise and vibration emission
These declared values were obtained by laboratory type testing in
compliance with the stated standards and are not adequate for use
in risk assessments. Values measured in individual work places
may be higher than the declared values. The actual exposure values
and risk of harm experienced by an individual user are unique and
depend upon the way the user works, the workpiece and the
workstation design, as well as upon the exposure time and the
physical condition of the user.
We, Atlas Copco Tools AB, cannot be held liable for the con-
sequences of using the declared values, instead of values reecting
the actual exposure, in an individual risk assessment in a work
place situation over which we have no control.
Atlas Copco Tools - 9836 1761 00
6
RRD37/57Safety and operating instructions
To Next Page
Loading...
Need help?
General
