Text on image
(1) Week Timer (4) Status
(2) Week Action Schemes (5) Week Timer Inactive
(3) Week Cycle (6) Remaining Running Time
• A new window opens. Select Week 1 to set the Week Timer active.
Text on image
(1) Week Timer (3) Week Timer Inactive
(2) Week (4) Week 1
• Press the Escape key on the controller to leave this window. The status shows that week 1
is active.
Text on image
(1) Week Timer (4) Status
(2) Week Action Schemes (5) Remaining Running Time
(3) Week Cycle
• Press the Escape key on the controller to go to the main Week Timer menu. Select
Remaining Running Time from the list and press the Enter key on the controller to Modify.
Instruction book
2920 7140 52 61
To Next Page
Loading...
Need help?
General
