- 56 -
1. More frequently when operating in a dusty environment.
2. Refer to engine operation manual.
3. After a days work.
4. Yearly is only valid when using PARCOOL. Change coolant every 5 years.
5. Use Atlas Copco oil filters, with by-pass valve as specified in the parts list.
6. Gummed or clogged filters means fuel starvation and reduced engine performance.
7. See section Oil specification.
8. The following part numbers can be ordered from Atlas Copco to check on inhibitors and freezing points:
• 2913 0028 00 refractometer
• 2913 0029 00 pH meter
9. See section Safety valves.
10. See section Before starting.
11. Replace all rubber flexibles each 6 years.
Other specific engine and alternator requirements, refer to the books.
Notes :
To Next Page
Loading...
