Do you have a question about the Atlas Copco XAHS 250 DD7 and is the answer not in the manual?
Model | XAHS 250 DD7 |
---|---|
Free Air Delivery | 250 cfm |
Maximum Pressure | 175 psi |
Drive Type | Direct Drive |
Engine | Deutz diesel |
Procedures and precautions for safe movement and setup of the unit.
Guidelines for safe operation, including environmental and gas handling.
Procedures for personnel, tools, and preventing unintended starting during maintenance.
Diagram and explanation of the system during load condition.
Explanation of the air path through the compressor element and receiver.
Diagram illustrating the continuous regulating system with components.
Schematic diagram of the electrical system with negative earthed configuration.
How to operate the generator and identify/reset fault situations.
Procedures for safely parking the compressor, including support leg and brake usage.
Guidelines for safely towing the compressor, including vehicle connection and door security.
Pre-start checks including battery, oil levels, fuel, and air filters.
Schedule outlining daily, initial, 500-hour, and 1000-hour maintenance tasks.
Step-by-step guide for draining oil, replacing the filter, and refilling.
Procedure for adjusting the continuous regulating system's working pressure.
Procedure for adjusting brake shoes to compensate for lining wear.
Testing the brake cable adjustment and correct position of markings.
Detailed steps for adjusting brake cables and equalizer for proper brake function.
Diagnosing and correcting problems related to starter motor, battery, and engine firing.
Diagnosing and correcting issues like engine stopping or hourmeter malfunction.
Diagnosing and correcting problems with compressor loading or unloading.
Diagnosing and correcting engine overheating issues.
Diagnosing and correcting issues causing shutdown or overheating.
Diagnosing and correcting compressor overheating issues.
Table detailing pressure and temperature settings for safety and shutdown devices.