To Next PageTo Next Page
Need help?Do you have a question about the Atlas Copco XAVS 340 DD6 and is the answer not in the manual?
General| Brand | Atlas Copco |
|---|---|
| Model | XAVS 340 DD6 |
| Category | Air Compressor |
| Language | English |
General safety instructions to be read attentively before operating, towing, lifting, maintenance or repairing the unit.
Instructions on how to operate the compressor, including parking, towing, and lifting.
Procedure for adjusting the continuous regulating system, including pressure settings for various models.
Troubleshooting guide for common problems, possible faults, and corrective actions.
Troubleshooting guide for further issues like overheating and unit stopping.
Table detailing shutdown switch and safety valve settings for various compressor models.
General safety rules for unit operation, maintenance, and general care of machinery.
Requirements for personnel performing maintenance and repair work.
Procedures for adjustment, repair, testing, and maintenance of safety valves.
Diagram and reference list for the compressor regulating system in load condition.
Diagram illustrating the continuous regulating system of the compressor.
Components of the continuous regulating system and their functions.
Wiring diagram for the compressor's electrical system, including component references.
Configuration of DIP switches for specific compressor models with and without cold start option.
Configuration of DIP switches for specific compressor models with and without cold start option.
Safety precautions and step-by-step instructions for parking, towing, and lifting the compressor.
Detailed instructions for safely parking the compressor, including securing the unit and brake application.
Guidelines for safely towing the compressor, including pre-run inspections and locating the unit.
Procedure for adjusting the towbar height, including torque values and attention points.
Pre-start checks including battery, engine oil, compressor oil, fuel, and air filters.
Description of the control panel layout, indicators, and controls.
Instructions for operating the compressor, including regular checks and door status.
Summary of maintenance instructions and schedule based on operating hours or calendar time.
Further maintenance tasks and intervals for compressor components.
Maintenance schedule based on mileage (km) for various checks and adjustments.
Recommendations for Atlas Copco branded oils for compressor and engine, and oil properties.
Procedure for checking compressor oil level daily after running the compressor.
Guidance on changing engine oil and oil filters as per the maintenance schedule.
Procedure for changing compressor oil and oil filters, including draining and refilling steps.
Procedure for flushing the compressor oil system when changing oil types or if oil is aged.
Guidance on estimating top-up volume of PARCOOL EG Concentrate without draining the system.
Estimating top-up volume of PARCOOL EG Concentrate after draining a calculated volume.
Checks required for the safety valve, including lifting gear and set pressure.
Procedure for adjusting brake shoes to re-establish clearance and compensate for wear.
Procedure for adjusting brake cables, including lock nuts, equalizer position, and road testing.
Procedure for adjusting conventional taper roller bearings and compact bearings.
Table of shutdown switch and safety valve settings for various compressor models.
