Need help?Do you have a question about the ATLAS TRAP AT 400 and is the answer not in the manual?
Details control box components including toggle switch, firing button, circuit breaker, and release mechanism plug.
Instructions for adjusting the trap's angle elevation using a wrench and bolt.
Procedure for tilting the machine left or right by loosening and retightening a bolt.
How to adjust the spring tension for throwing distance using a wrench and tension nut.
Specifies battery type, importance of charge, clip inspection, and charging methods.
Guide to adjusting trap timing by positioning the clay target relative to the throwing strip.
Steps to advance trap timing by adjusting the timing cam clockwise.
Steps to slow trap timing by adjusting the timing cam counter-clockwise.
Process for reloading the magazine when the trap runs out of targets.
Instructions for connecting the wireless remote receiver to the trap and battery.
Guide on how to operate the wireless transmitter to fire the trap.
Essential safety rules for operating the trap, including positioning, spectators, and unattended operation.
Methods for safely un-cocking the trap, either via switch/button or manual arm rotation.
Warning against touching or pushing the throwing arm to prevent accidental firing or damage.
Solutions for common problems like no cocking, fuse blowing, feeding issues, and timing.
Details the 5-year limited warranty for the trap and lifetime for the clutch, including conditions.
Atlas Trap Co.'s disclaimer regarding consequential or incidental damages and liability limits.
General| Brand | ATLAS TRAP |
|---|---|
| Model | AT 400 |
| Category | Sports & Outdoors |
| Language | English |
To Next Page
