Quick Start Steps 8
Cyclops
You can now switch to the ON position the power
switch on the back of the console. The computer
will automatically turn on, check that the monitor
turns on otherwise turn it on. Also turn on the
printer and Insert the Ink cartridges.
Take the two batteries placed previously under charge, insert them into the
measuring heads and press the central gray button for more than a second in
order to Turn on both heads.
If all goes well you got to this point the
computer has fi nished starting. In the
monitor appears the logo page of Wheel
Aligner program. In the lower right side
of the monitor, spent about one minute,
you have to see the two Bluetooth icons in
Blue color which tells us that the heads are
connected with the Computer.
Now mount the heads of their respective
supports. Make sure that the arrow stuck on
the cover is facing the driving direction of
the vehicle.
To Next Page
Loading...
Need help?
General
