FA Series Loudspeakers INSTALLATION INSTRUCTIONS
Specifications are subject to change without notice
www.AtlasSound.com
1601 JACK MCKAY BOULEVARD ENNIS, TEXAS U.S.A. • TELEPHONE: (800) 876-3332 • FAX: (800) 765-3435
©2004 ATLAS SOUND LP Printed in U.S.A. 00904 ATS000743 RevC 9/04 PN 371041
• FA Series Loudspeakers are typically "front mounted" to FA Series enclosures. To avoid damage to the rubber
surround on the speaker cone, the provided nylon washer must be placed on the mounting screws.
• Two (2) washers per screw are required.
• The drawing above shows the proper assembly of the screws and nylon washers.
Installation must comply with all Building Codes and NFPA guidelines. Installation must adhere to N.E.C.
and NFPA 70/72 wiring directives and comply with all National and Local Building Codes.
Need help?
General
