Owner’s Manual
TSD-RMK
TSD Rack Mount Kit
AtlasSound.com – 3 –
Specifications are subject to change without notice.
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
TSD Installation
1. Line up the TSD with the TSD-RMK top clearance holes in the space you want your TSD located.
2. Using two (2) M3 x 3mm Pan Head screws, thread through the top mounting holes into the
threaded inserts on the TSD. Note: Do not over tighten screws or damage might occur.
3. Secure the bottom of the TSD to the TSD-RMK in the same manner using two (2) M3 x 5mm Flat
Head screws.
4. Repeat the process for any other TSDs you want installed in the TSD-RMK. Use the included blank
panels for any unused spaces.
Specifications
Description TSD Rack Mounting Plate
Chassis Color Black
Chassis Material Aluminum
TSD Mounting Hardware
Top Screws Qty 8, M3 x 3mm Pan Head
Bottom Screws Qty 8, M3 x 5mm Flat Head
Blanking Panels Qty 3
Dimensions H1.75"(44.45mm)xW19"(482.6mm)
Weight 6oz,.165kg
To Next Page
Loading...
