Atlas WB41 User Manual

6
STEP 4: Next, place the wheel on the shaft.
STEP 5: Finally, place the Quick Nut on the shaft with the pressure cup attached. Tighten
the Quick Nut securely, but do not over tighten.
NOTE: Over tightening the Quick Nut will cause damage to the nut.
STEP 6: Verify that the balancer is in DYNAMIC mode, then manually enter the…
“A” (distance of the wheel from the machine in millimeters)

Atlas WB41 Specifications

General

Brand	Atlas
Model	WB41
Category	Wheel Balancers
Language	English