Atlas WB41 User Manual

9
STEP 7: Press “ENTER”
STEP 8: The display will read “Add 0”. Lower the hood and spin the wheel.
STEP 9: When the cycle is finished and the tire stops, the display will read “3.50 Add”
(100 grams). Rotate the wheel until all the inside weight indicators are fully lighted.
Apply the 3.5 ounce (100 gram) calibration weight on the inside edge of the wheel at
the 12 o’ clock position. Lower the hood and spin the wheel.
STEP 10: When the cycle is finished, the display will read “Add 3.50” (100 grams).
Remove the calibration weight from the inside edge of the wheel.
Rotate the wheel until all the outside weight indicators are fully lighted.
Apply the 3.5 ounce (100 gram) calibration weight to the outside edge of the wheel
at the 12 o’ clock position. Lower the hood and spin the wheel.

Atlas WB41 Specifications

General

Brand	Atlas
Model	WB41
Category	Wheel Balancers
Language	English