MaMast st sysyststeem / m / ReReppaaiir ir innststrrucuctitioonns / s / DDiismsmaanntltliinng tg thhe me maastst 66..1155
Adjusting the play in the mastAdjusting the play in the mast
The lateral play is adjusted with 0.5 or The lateral play is adjusted with 0.5 or 1 millimetre shims behind the thrust rollers. If1 millimetre shims behind the thrust rollers. If
there is excessive play between thrust roller and roller surface on the mast profile, thethere is excessive play between thrust roller and roller surface on the mast profile, the
thrust roller must be replaced with a new rollthrust roller must be replaced with a new roller with a larger diameterer with a larger diameter..
Thrust rollers are available in Thrust rollers are available in three different diameters (the diameter is specified on eachthree different diameters (the diameter is specified on each
roller):roller):
160 mast:160 mast:
•• 7878.2 .2 mmmm, 7, 788.6 .6 mm mm 779.9.0 0 aand nd 7979..4 m4 mm.m.
200 mast and TF-mast:200 mast and TF-mast:
•• 10107.7.0 m0 mm, m, 10107.7.5 m5 mm 1m 10808.0 .0 mmmm, a, and nd 10108.8.5 m5 mm.m.
Table 6.2Table 6.2 Permitted play between roller surfaces on the mastPermitted play between roller surfaces on the mast
MasMast tyt typepe PePermrmititted ted plaplay bey betwtweeeen thn thrurust rst rollollerers and rs and rololleler surr surfacfaces bees betwtweeeen man mastst
sections and fork carriage and mastsections and fork carriage and mast
116600 00..5 5 mmmm
220000 00..6 6 mmmm
TTFF 00..6 6 mmmm
To Next Page
Loading...