Need help?Do you have a question about the Atlona AT-HDR-M2C and is the answer not in the manual?
General| Brand | Atlona |
|---|---|
| Model | AT-HDR-M2C |
| Category | Media Converter |
| Language | English |
Outlines Atlona's warranty coverage for product defects in materials and workmanship.
Specifies the duration of product warranty based on purchase date and product type.
Details warranty periods for hardware/electronics and cable products purchased new.
Defines warranty periods for refurbished (B-Stock) hardware and electronics.
Explains how to initiate warranty service, including contact and return procedures.
Lists conditions and damages not covered by the Atlona Limited Product Warranty.
Clarifies warranty limitations regarding product obsolescence, compatibility, and acts of God.
Defines Atlona's maximum liability and disclaims responsibility for incidental or consequential damages.
States warranty remedies are exclusive and disclaims implied warranties like merchantability.
Outlines additional conditions for the limited product warranty, including voiding conditions.
Introduces the built-in web GUI for intuitive management of AT-HDR-M2C features.
Steps to access the web GUI by launching a browser and entering the IP address.
Explains the default username ('root') and password ('Atlona') for logging into the web GUI.
Describes the navigation menu bar at the top of the web GUI and how to use it.
Details the Info page, which displays system, video, and audio information.
Explains how toggle controls are used to enable/disable features or select settings in the web GUI.
Describes the use of slider controls for adjusting values like volume, bass, and treble.
Explains the function of buttons like 'Save' and 'Factory Defaults' for executing actions.
Breaks down the Info page into System Info, Video Info, and Audio Info sections.
Describes the System Info section, covering model, software, and boot loader versions.
Explains the Video Info section, detailing input signal type, format, aspect, color space, and depth.
Covers the Audio Info section, detailing audio format, sampling rate, and channels.
Introduces the A/V Settings page, divided into Video and Audio sections for adjustments.
Details video settings like Preferred Timing and HDCP control within the A/V Settings page.
Explains audio adjustments for mute, volume, bass, and treble in the A/V Settings page.
Describes the Config page for managing usernames and passwords for web/telnet login.
Details how to change the password for the administrator user and manage user login settings.
Explains how to display, edit, or delete user login settings within the web GUI.
Introduces the System page, divided into Network and System sections for configuration.
Details network configuration options like IP Mode, IP address, Netmask, and Gateway.
Explains how to configure the gateway (router) address for static IP mode.
Details how to set the Telnet listening port number.
Describes how to enable or disable login credentials for Telnet sessions.
Explains how to set the inactivity timeout interval for Telnet sessions.
Details how to toggle Broadcast mode ON or OFF.
Describes system functions like resetting to factory defaults and firmware updates.
Controls enabling/disabling PCM audio on HDMI output.
Adjusts the bass level of the audio output.
Enables or disables broadcast mode for control system synchronization.
To Next Page
