Need help?Do you have a question about the Atlona OmniStream AT-OMNI-121 and is the answer not in the manual?
General| Video Resolutions | Up to 4K@60Hz |
|---|---|
| Network Protocols | TCP/IP, UDP, IGMP |
| Power Supply | 12V DC |
| Ethernet | 10/100/1000 Mbps |
| HDCP | HDCP 2.2 |
| Video Input | HDMI 2.0 |
| Video Output | HDMI 2.0 |
| Audio Input | Embedded HDMI |
| Audio Output | Embedded HDMI |
| Network Interface | RJ-45 |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Humidity | 10% to 90% non-condensing |
| Video Formats | H.264 |
| Audio Formats | PCM |
| Supported Resolutions | 480p, 720p, 1080p, 4K |
| Compression | H.264 |
| Storage Temperature | -4°F to 140°F (-20°C to 60°C) |
Details the physical ports and indicators for the AT-OMNI-121 single-channel decoder.
Details the physical ports and indicators for the AT-OMNI-122 dual-channel decoder.
Guide for connecting the optional external power supply and Ethernet for network.
Instructions for establishing RS-232, IR, and analog audio connections.
Steps for finding devices and configuring them using the Atlona Management System.
Configuration for unicast/multicast modes and optimizing video output quality.
Procedures for adding text overlays and custom logos to video streams.
Setup for controlling displays via IR signals from remote or control systems.
Explains various methods for controlling devices via serial communication over IP.
Guide for configuring multi-display video walls using Atlona Velocity software.
Overview of the AMS Device Info page and network interface configuration.
Details on configuring output streams, HDCP, and serial port parameters within AMS.
Procedures for updating device firmware and activating Dolby Vision licenses.
Detailed product specifications, environmental data, and physical mounting instructions.
To Next Page
