Need help?Do you have a question about the Atlona AT-HDVS-CAM and is the answer not in the manual?
General| Video Output | HDMI |
|---|---|
| Image Sensor | 1/2.8" CMOS |
| Resolution | 1920x1080 |
| Frame Rate | 30 fps |
| Low Light Performance | 0.5 Lux @ F1.6 |
| Power Supply | 12V DC |
Provides essential safety guidelines for installation, operation, and maintenance of the device.
Identifies and describes the function of each port on the AT-HDVS-CAM.
Details how to connect Ethernet, USB, RS-232, and power cables to the camera unit.
Provides step-by-step instructions for mounting the camera to a wall using the included bracket.
Visually illustrates the connections between the AT-HDVS-CAM, laptops, displays, and other AV equipment.
Step-by-step guide to log in to the camera's web-based graphical user interface for control.
Instructions on how to update the camera's firmware via the webGUI.
Details DHCP/static IP, subnet, gateway, MAC address, and port settings.
Procedures for changing the username and password for the webGUI.
Steps to reset the camera to factory defaults or perform a system reboot.
Explains how to use pan, tilt, zoom, focus, and preset controls within the webGUI.
Commands for controlling pan/tilt movement, speed, and setting movement limits.
Details commands for setting camera address, power, zoom, and focus.
Lists Pelco-D commands for PTZ movement, zoom control, and focus adjustment.
Lists Pelco-P commands for PTZ movement, zoom control, and focus, including XOR checksum.
Explains how to use the IR remote for camera control, including power, focus, zoom, and presets.
To Next Page
