Atlona AT-UHD-CLSO-601 User Manual

atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
4K/UHD 6 Input Multi-Format Switcher
with Mirrored HDMI and HDBaseT
Outputs, PoE, and Auto-Switching
Please check http://www.atlona.
com/AT-UHD-CLSO-601
for the most recent firmware
update or manual
User Manual
AT-UHD-CLSO-601

Atlona AT-UHD-CLSO-601 Specifications

General

Model	AT-UHD-CLSO-601
Category	Switch
HDMI Inputs	6
HDMI Outputs	1
HDBaseT Outputs	1
4K/UHD Support	Yes
HDCP Compliance	HDCP 2.2
Audio De-embedding	Yes
Control	RS-232, IR, Ethernet
Supported Resolutions	Up to 4K@60Hz
HDCP Support	2.2
Audio Formats	Dolby Digital, DTS

Summary

Introduction

Features

Details the key capabilities and functionalities of the switcher.

Analog Multi-Function Inputs

Analog Audio

Microphone Connection

On Screen Display (OSD)

Setup

Network

Displays network status and DHCP configuration settings.

TCP/IP

TCP/IP WebGUI

Guides on accessing and using the WebGUI for initial setup and configuration.

Network Setup

Settings

System Settings

Controls power, panel lock, and auto-switching features for the switcher and displays.

Video Settings

Factory Default

Config

EDID

Audio

Volume Settings

Controls master volume and individual input volume levels.

Ducking Settings

Configures microphone ducking parameters like attack time, release time, trigger level, and program decrease.

Ducking Configuration

Control

Button Control Selection

Assigns functions to the switcher's power and volume/mute buttons.

CEC Control

Enables or disables CEC commands sent to connected displays for power control.

Display Control Settings

TCP/IP Settings of Controlled Device

RS-232/IP Commands

Specifies commands and feedback for controlling devices using RS-232 or IP protocols.

Update

RS-232

Connection

Set Up

Commands

Advanced Commands and Resolutions

Command Reference

IP Commands

Baud Rate

CLSO-601 Updating

Specifications

Safety Information

Safeguards

Precautions