Operation and maintenance manual - EN
EN
www.atmos.cz
EN-9
3. Burner accessories
Accessory - burner part
Stop for the end switch 1 piece
Bushing for various applications – formerly for TS and TV sensors 2 pieces
Interconnection cable between the boiler and the burner with a connector (6x1.5 mm)
1 piece
Operation and Maintenance Manual 1 piece
Fuse - type F 3.15A/1500A/5x20mm (ignition spirals) 2 pieces
Fuse - type F 0.8A/1500A/5x20mm (conveyor) 1 piece
Fuse - type F 1.0A/1500A/5x20mm (ventilator - possible replace with F 0.8A) 1 piece
Complete screw fitting (3/4”) with solenoid control and connecting cable
(version for Pxx Compact boilers) 1 piece
Accessories that are not part of the burner and can be purchased separately:
DA1500 pellet conveyor with the length of 1,5 m and diameter of 75 mm (25 W) - CODE: H0151
DA2000 pellet conveyor with the length of 2 m and diameter of 75 mm (25 W) - CODE: H0207
DA2500 pellet conveyor with the length of 2.5 m and diameter of 75 mm (25 W) - CODE: H0208
DA3000 pellet conveyor with the length of 3 m and diameter of 75 mm (40 W) - CODE: H0209
DA4000 pellet conveyor with the length of 4 m and diameter of 75 mm (40 W) - CODE: H0212
Water temperature sensor with a 5 m cable (range - 20 ...+ 110 °C)
- type KTF 20 - CODE: P0431
Flue gas temperature sensor with a 2.5 m cable (range -20 ...+ 300 °C)
- type VFF00-75P65 - CODE: P0414
Pocket for a flue gas sensor to be positioned in the flue gas duct, G1/2“ x 85 mm - CODE: V0524
AD02 module for control of the boiler fan via a reserve output - CODE: P0432
AD03 module for control of the boiler fan and the pump in the boiler circuit (solar)
- CODE: P0436
AD04 module for special funcion of the burner - CODE: P0446
Cavity with tin for extension of conductors (sensors) - CODE: P0445
AS25 set, which consists of two KTF 20 sensors with a 5 m cable, AD02 module
and a special adapter for DCxxSP(X), CxxSP, ACxxSP boilers - CODE: P0435
AS2012 Set, which consists of two KTF 20 wahter sensors with a 6 m cable,
one flue gas (solar) sensor up to 400 °C with a 5 m cable, a pocket for the solar sensor, four
cavities with tin for easy connection of conductors, an AD03 module and a special
adapter for DCxxSP(X), CxxSP, ACxxSP boilers - CODE: P0444
SC2012 Sensor Set, which consists of three KTF 20 wahter sensors with a 6 m
cable, one flue gas (solar) sensor with a 5 m cable and a pocket for the solar sensor
- CODE: P0437
Special adapter for DCxxSP(X), CxxSP, ACxxSP boiler that enable operation
of the extraction fan of the boiler together with the pellet burner - CODE: S0725
To Next Page
Loading...