EasyManua.ls Logo

ATO BT20 - Making and Receiving Calls with a Bluetooth Mobile Phone

Default Icon
15 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
User Guide Page 12
Making
Making Making
Making and Receiving
and Receiving and Receiving
and Receiving Calls
CallsCalls
Calls with a
with a with a
with a
B
BB
Bluetooth
luetoothluetooth
luetooth
M
MM
Mobile phone
obile phoneobile phone
obile phone
After pairing the Headset with your mobile phone, you can make and receive
calls using the Headset within a range of approximate 10 meters. The
Headset light indicator flashes more quickly during a call.
To make a call using a Bluetooth enabled mobile phone:
1. Make sure the phone and the Headset are on and within range of each
other.
2. If the mobile phone supports voice dialing, press the ON/OFF button of
the Headset once. After hearing a beep sound from the Headset, you
can voice dial as you normally would.
3. If the mobile phone does not supports voice dialing, enter the number
using the phone’s keypad or recall it from the phone book the as you
normally would.
4. After the call has been set up, the call should be transferred to the
Headset automatically.
5. You can end the call by pressing ON/OFF button of the Headset.
To answer a call,
1. When the Headset rings, press the ON/OFF button of the Headset once.
2. If the phone rings first, wait until the Headset rings, then press the
ON/OFF button
3. You can end the call by pressing ON/OFF button of the Headset once or
pressing the NO key on the phone.