Atom SL-602 - Alarm Testing Procedure

21
b Removetheexistingbatteryand
replace with a new CR2 size 3V
Lithium battery making sure
that the positive and negative
connections of the battery are
in the correct position andthat
the battery label is folded and
kept outside of the battery
aperture.TheredLEDonthetest
button should now ash every
48secondstoshowthealarmis
active.
c Replace the alarm on its
mounting ring. Position the
smokealarmoverthemounting
ring and turn clockwise you
should feel the alarm click into
place.