Why does my FireAngel Smoke Alarm not sound when testing?
If your FireAngel smoke alarm isn't sounding during testing, ensure you firmly push the test button. If the unit has been silenced, pressing the button will switch the alarm back on; press again to test it. If that doesn't work, replace the battery. Contact technical support if the alarm still fails to self-test after replacing the battery.
What to do if my FireAngel Smoke Alarm chirps intermittently?
If your FireAngel smoke alarm chirps intermittently, replace the battery. If the chirping continues after a recent battery replacement, check the location of your smoke alarm. Also, ensure the chirping is definitely coming from your smoke alarm and not another alarm (smoke, carbon monoxide, gas, or burglar alarm).
Why do I experience frequent unwanted alarms with my FireAngel Smoke Alarm?
If you're experiencing frequent unwanted alarms with your FireAngel smoke alarm, check its location. Also, clean the smoke alarm.
What to do if my FireAngel Smoke Alarm activates when no smoke is visible?
If your FireAngel smoke alarm activates when no smoke is visible, check the location of your smoke alarm and clean it.
Procedure for testing the smoke alarm after it has been installed.
Troubleshooting steps for when the smoke alarm does not respond to testing.
Resolving issues causing the smoke alarm to chirp periodically.
Diagnosing and fixing false alarms when no smoke is present.
Troubleshooting why the smoke alarm does not sound when the test button is pressed.
General| Brand | Atom |
|---|---|
| Model | SL-602 |
| Category | Smoke Alarm |
| Language | English |
To Next Page