Error Codes
When a malfunction occurs on your scooter, one of the following error codes will appear on the screen. Please refer to the explanation of each
error code to diagnose the error. Please quote the error code when you contact the help center. DO NOT try to repair the scooter by yourself.
E1/F1: Brake Error
Appear when the power-on self-check
fails.
Appear when the error occurs during
operation.
Check if the brake handle cable is
connected properly.
Replace brake handle to test, if the error
code disappear, the handle is the issue.
F1:
E1:
E2/F2: Accelerator Error
Appear when the power-on self-check
fails.
Appear when the error occurs during
operation.
Check if the accelerator cable is connected
properly.
Replace the accelerator to test, if the
error code disappear, the accelerator is
the issue.
F2:
E2:
E3: Communication Error
Replace the connecting cable between
display and controller, if the error code
disappears, the connecting cable is the
issue and you need to replace it.
If the error code still shows, replace display
to test. If the error code disappears, display
is the issue and needs replacement.
Replace controller to test. If the error
code disappears, controller is the issue
and needs replacement.
17
To Next Page
Loading...