Please retain the box and packaging material
in good condition in case you need to ship
your scooter in the future.
Assembled
KickScooter
Remove your scooter from the box and place it on a bench or
stools where scooter’s wheel can spin freely. Carefully remove the
protection material from the scooter and set it aside.
Please check if all the items below are included. If there are any
components missing, please contact your dealer or ATOMI
support center. After verifying that all components are present
and in good condition, you can then assemble your scooter.
Hex
Wrench
Screw
x 2
Battery
Charger
User
Manual
4
To Next Page
Loading...