ATOMI Smart Color String Lights - Step 1: Initial Setup; Step 2: Installing; Installing by Structure; Installing by Guide Wire

1. Carefully unpack Sma String Lights from the box.
2. Before installing, plug the Sma String Lights into
an outlet to ensure all lights work properly.
5 6
Installing by Structure
Connect securely to structure at the begining,
middle (the sixth or seventh bulb holder), and
end of each string light.
Aach using hooks
or cable ties
Wire to
Structure
Guide Wire
Wire to
Structure
Aach to
structure to the
sixth or seventh
holder in middle of
each String light
Aach to
structure on
first and last
holder
Installing by Guide Wire
Aach ring at the back of every bulb holder to the
guide wire using a S-hook or cable tie (not included).
1. 2.
IMPORTANT: Unplug the Sma String Lights prior to mounting.
Step 1:
Initial Setup
Step 2:
Installing
NOTE: Aachment hardware, such as hooks or nylon
cables ties is not included.