Need help?Do you have a question about the ATOMSTACK X40 Pro and is the answer not in the manual?
General| Laser Power | 40W |
|---|---|
| Laser Type | Diode Laser |
| Laser Output Power | 40W |
| Wavelength | 450nm |
| Engraving Accuracy | 0.01 mm |
| Positioning Accuracy | 0.01mm |
| Control Software | LaserGRBL, LightBurn |
| Cooling System | Air Cooling |
| Weight | 12 kg |
| Focusing Method | Manual |
| Supported Materials (Engraving) | Wood, Acrylic, Leather |
| Supported Materials (Cutting) | Wood, Acrylic, Fabric, Paper, Bamboo, Plastic |
| Supported File Formats | BMP, JPG, PNG, DXF, SVG |
| Data Transmission Method | USB |
| Operating Voltage | 24V |
| Power Supply | AC 110V-240V, 50/60Hz |
| Spot Size | 0.08 mm |
To Next Page
