Need help?Do you have a question about the Atos BullSequana Edge and is the answer not in the manual?
Defines the target audience for this guide, including administrators and operators.
Step-by-step instructions for safely removing a network antenna from the server.
Step-by-step instructions for safely installing a new network antenna into the server.
Detailed procedure for the safe removal of a fan component from the server.
Step-by-step guide for the correct installation of a fan component into the server.
Instructions for safely removing the processor air duct assembly from the server.
Procedure for correctly installing the processor air duct assembly back into the server.
Steps to safely remove a memory module from its slot in the server.
Procedure for correctly installing a new memory module into the server slot.
Instructions for safely removing an accelerator card from the server.
Procedure for correctly installing a new accelerator card into the server.
Step-by-step guide for safely removing a 2.5-inch disk drive from its bay.
Procedure for correctly installing a new 2.5-inch disk drive into its bay.
Instructions for safely removing a 3.5-inch disk drive from its bay.
Procedure for correctly installing a new 3.5-inch disk drive into its bay.
Steps to safely remove the intrusion detection switch and its associated cable.
Procedure for correctly installing the intrusion detection switch and connecting its cable.
Detailed steps for safely removing the top aesthetic cover of the server.
Procedure for correctly installing the top aesthetic cover back onto the server.
General| Product Type | Server |
|---|---|
| Processor | Intel Xeon Scalable processors |
| Memory | Up to 1TB DDR4 ECC Registered DIMMs |
| Storage | Multiple NVMe SSD and HDD options |
| Power Supply | Redundant power supplies |
| Operating System | Supports various Linux distributions and Windows Server |
| Accelerators | NVIDIA GPUs, Intel FPGAs |
To Next Page
