Atosa AGR-6B-24GR - User Manual

Questions and Answers

J
James RamirezAug 9, 2025
What to do if the pilot light ignites but not the main fire on my Atosa Ranges?
- J
  Joshua HughesAug 9, 2025
  If your Atosa Ranges pilot light ignites but the main fire doesn't, several factors could be at play. First, check if the gas pressure in the pipe is sufficient; if not, contact your local gas supplier. Second, the main fire nozzle might be blocked, in which case you should dredge the nozzle. Other potential issues include faulty gas control valves (replace them), an excessive distance between the pilot light and the main fire (adjust the distance), or a pilot light flame that is too low (adjust its height).
J
John FuentesAug 19, 2025
Why is there a yellow flame and black smoke coming from my Atosa Ranges?
- D
  Denise GuerraAug 19, 2025
  If you notice a yellow flame and black smoke coming from your Atosa Ranges, it could be due to several reasons. One possibility is the type of gas being used; try changing the gas. Another reason may be that the nozzle aperture doesn't match the gas resources; in this case, you should adjust the nozzle diameter. Also, there might not be enough air for ignition, so increase the damper opening degree. Lastly, during peak gas usage, the gas sources may float heavy, so turn down the valve flow and then turn it back up after the peak.
K
Kevin SmithAug 30, 2025
How to fix Atosa Ranges that is not lighting?
- D
  Daniel HarveyAug 30, 2025
  If your Atosa Ranges is not lighting, it could be due to insufficient gas pressure in the pipe, so contact the local gas supply department. Alternatively, the nozzle could be occluded, in which case you should dredge the nozzle.