4
January 2005
Progressive Jackpot
What is this manual about
This document describes how to setup and configure
an Atronic gaming machine to participate in a linked
progressive Jackpot. It explains configuration of the
three most important progressive Jackpot types in a
detailed step-by-step guide.
This manual is intended to provide QUALIFIED
TECHNICAL PERSONNEL ONLY. Please read it carefully
before starting the Jackpot configuration.
Procedures described in this manual refer to both
Atronic Cashline™ machines using O-Level (STD)
software and Atronic e-motion™ / Hi(!)bility™ machines
using Q-Level (STD) software, if not otherwise stated.
Please note that USA software versions (P-Level) may
use different settings and procedures.
Information in this manual includes the most up-to-
date information available just before creation. All part
numbers and descriptions have been carefully reviewed
and checked for accuracy. All drawings and diagrams
contain the newest revisions released by Atronic. If
earlier revisions of diagrams or drawings are required,
please contact your Atronic Technical Services
representative.
Atronic International
Borsigstr. 26
32312 Luebbecke, Germany
(+49) 5741 273 720 FAX (+49) 5741 273 727
Atronic Americas
16537 N. 92nd Street
Scottsdale, Arizona 85260, USA
(+1) 480 922 0707 FAX (+1) 480 922 8877
Information in this document is subject to change without notice and does
not represent a commitment on the part of Atronic. No part of this
manual may be reproduced or transmitted in any form or by any means,
electronic or mechanical, including photocopying and recording, for any
purpose other than the purchaser’s personal use without written consent
of Atronic International. This document may contain trademarks of Atronic
International. All other brand or product names are trademarks or registred
trademarks of their respective companies.
© 2003 - 2005 Atronic International GmbH. All rights reserved.
INTRODUCING
To Next Page
