Need help?Do you have a question about the ATS 2330 Series and is the answer not in the manual?
Process of removing the unit from its packaging and retaining materials for inspection.
Contacting the ATS service department for assistance with setup, operation, or issues.
Critical instructions for safe operation and identification of safety warning labels on the equipment.
Specific cautionary statements to prevent equipment damage and ensure safe operation of the tester.
Visual guide to the placement of safety warning labels on the test equipment.
Detailed list and illustration of the main components of the PLC Lever Arm Tester.
Overview of design features and technical specifications of the lever arm testers.
Steps for safely unpacking, positioning, and connecting the tester to a power source.
Instructions for assembling and adjusting the lever arm, including safety guards and actuators.
Explanation of the main screen interface, including process time, unload time, and status bars.
Details on accessing and configuring system parameters via the View Screen, including test types and delays.
Step-by-step instructions for performing a standard test cycle, including weight calculations.
Procedures for managing a test interruption due to sample breakage, including aborting or continuing.
Guidelines for inspecting and maintaining the knife edges of the lever arm.
Guidelines for inspecting and maintaining the V-blocks used in the lever arm assembly.
Routine checks, storage advice, and important safety cautions related to machine upkeep.
General| Amplitude Range | -130 dBm to +13 dBm |
|---|---|
| Modulation Types | AM, FM, PM, Pulse |
| Interface | USB, LAN |
| Power Supply | 100-240 VAC, 50/60 Hz |
| Type | Signal Generator |
| Output Impedance | 50 Ω |
| Harmonic Distortion | <-30 dBc |
| Dimensions | 330 mm x 260 mm x 110 mm |
| Weight | 4.5 kg |
To Next Page