Need help?Do you have a question about the ATS Maximus MXS2000 Series and is the answer not in the manual?
General| Brand | ATS |
|---|---|
| Model | Maximus MXS2000 Series |
| Category | Card Reader |
| Language | English |
Lists technical specifications for Maximus terminals, including display, memory, and interfaces.
Lists main configuration part numbers and descriptions for Maximus terminals.
Advises on indoor operation, location selection, and mounting surface requirements.
Guides on wall mounting the terminal and separating its case.
Details connecting Ethernet, RS232, GSM, DIDO modules, and scanners.
Explains connecting power via pack, PoE, or UPS battery backup.
Introduces the Test, Setup, Diagnostics mode for configuration and testing.
Details setting up devices, passwords, and managing downloads.
Guides initial setup parameters like IP address, DHCP, and Date/Time.
Accesses Test, Setup, Information modes and other commands.
Configures terminal settings including host type and network parameters.
Accesses various terminal tests via the Test Mode screen.
Details cleaning procedures for terminal, badge reader, and biometric sensor.
Provides a table of common symptoms, causes, and solutions for terminal issues.
Explains 1:1 Verification and 1:N Identification modes for fingerprints.
Describes E-Field, Capacitive, and Multi-Spectral Imaging technologies.
Steps to manually configure the GSM terminal if the provider is not preconfigured.
To Next Page
