-the boilers
ATTACK PELLET - the boiler for burning the pellets
- Boiler designed for combustion of wooden pellets.
- Assembly, heating up and training of the attendance is performed by an assembly technician
trained by the manufacturer, who also fills the document on the boiler installation.
- Recommended operation boiler temperature is between 80°C and 90°C. Operation in lower
temperature can cause the condensate creation, loss of life and therefore the warranty cannot be
applied.
-
-
Only pellets by authorized classification of fuels can be used as fuel
The choice of the right boiler size, that means its heating output, is a very important condition
for economic operation and right function of the boiler. The boiler must be chosen so that its
nominal output responds to heat losses of the heated object.
The warranty does not apply for the boiler if:
is not operated with specified fuel- pellets by authorized specification of fuels
- if a proper mixing appliance (Regumat ATTACK-OVENTROP) is not installed in the
system, which provides minimum temperature of 65°C for return water during
operation.
.
2
To Next Page
Loading...
