Need help?Do you have a question about the ATTACK PELLET Series and is the answer not in the manual?
Overview of the boiler's purpose and design for economic heating.
Specific details for ATTACK PELLET 20 A and 30 A models.
Explains where and how the boiler is used for heating.
Details the boiler's construction, components, and features.
Explains the functions of the boiler's control panel.
Lists specifications for different boiler models.
Provides detailed drawings and measurements of the boiler.
Identifies key components with a numbered diagram.
Covers procedures and requirements for boiler installation.
Specifies requirements for certified installers and projects.
Details safety distances from flammable materials.
Specifies requirements for combustion air.
Outlines system preparation and water quality requirements.
Discusses adding external control elements for enhanced operation.
Covers electrical connection safety and standards.
Presents a wiring diagram for the boiler.
Explains the symbols used in the connection chart.
Describes requirements for the exhaust system.
Details chimney installation and draft requirements.
Recommends solutions to prevent corrosion and tar.
Lists relevant standards and regulations for boilers.
General instructions for safe and proper boiler operation.
Steps to take before starting the boiler.
How to start and operate the boiler.
Specifies authorized fuel type and specifications.
Control methods, safety, refuelling, and ash removal procedures.
Outlines regular maintenance tasks for the system and boiler.
Instructions for replacing door seals.
How to adjust door alignment.
Shows system diagrams for connecting components.
Specific system diagram for Regumat mixing system.
Disposal guidelines for the product at end of life.
Disposal guidelines for product packaging.
Lists included items and recommended accessories.
Troubleshooting guide for common problems and their solutions.
Title page of the service manual for the S1X pellet burner.
Introduces the burner and provides initial safety notes.
General safety precautions and warnings for burner operation.
Instructions for installing the S1X burner.
Details on starting and running the burner.
How to supply fuel to the burner.
Standard startup procedure and heating process.
General overview of burner settings.
Specific adjustments for the burner.
Troubleshooting photocell issues.
Describes protective mechanisms against backfire.
General maintenance overview for the burner.
Guide to identifying and diagnosing problems.
Troubleshooting fan issues.
Troubleshooting feeder issues.
Issues encountered after restarting the appliance.
General startup failure causes.
Complete wiring schematic for the S1X burner.
Explains how the burner operates.
Describes indicator lights and their meanings.
Guidance for adjusting burner parameters.
Illustrates output dependency on P2 settings via graph.
Exploded view of burner components.
Detailed parts list for the S1X burner.
Exploded view of pellet feeder components.
Detailed parts list for pellet feeders.
Instructions for installing the pellet feeder.
Title page of the instructions for the S2 pellet burner.
Key user guidance and warnings for the S2 burner.
Overview of the S2 burner's features and operation.
Physical dimensions and included components for the S2 burner.
Specifications, voltage, and energy consumption for the S2 burner.
Detailed explanation of operational sequences for the S2 burner.
Step-by-step guide for initial startup of the S2 burner.
Practical advice for daily operation of the S2 burner.
Explanation of control interface buttons for the S2 burner.
Instructions for adjusting parameters on the S2 burner.
Explains messages shown on the S2 burner's display.
Descriptions of menu options and their functions.
Default configurations prior to delivery for the S2 burner.
Procedure for modifying default parameters on the S2 burner.
Fine-tuning fuel feed rate for the S2 burner.
Step-by-step installation guide for the S2 burner.
How to initiate burner operation.
Procedures for shutting down the burner.
Immediate shutdown procedure for the burner.
Routine cleaning and upkeep tasks for the S2 burner.
Diagnostic guide for operational issues.
Detailed table linking faults to causes and remedies.
Diagram showing all S2 burner components.
List of all available spare parts for the S2 burner.
Complete wiring schematic for the S2 burner.
Details on electrical terminals and fuse specifications.
List of optional and included accessories for the S2 burner.
Section for recording installer details.
Log for maintenance and service records.
Access to advanced settings for qualified personnel.
Configuring burner output levels.
Settings for the ignition process.
Setting pre-combustion ventilation duration.
Configuring time from flame detection to full power.
Adjusting fuel feed during transition.
Setting post-operation fan and grate cleaning.
Calibrating flame detection.
Choosing between boiler or built-in thermostat.
Setting the display language.
Calibrating fuel quantity.
Monitoring feeder operation time.
Manual testing of components.
Options for saving/loading settings.
Recording and viewing fault codes.
Form for warranty registration.
Log for initial operation and service history.
Certificate of product conformity and approval.
To Next Page
General
