The design of this product(including internal software) and its
accessories is under the protection of relevant state laws.Any
violation of the relevant rights of our company will be subject
to legal sanctions.Users shall consciously abide by the relevant
state laws when using this products.
1.Copyright information
We will take no responsibility for any personal injury or property
damage caused by reasons other than the product quality
problem,which may include force majeure (natural disasters,etc)
or personal behavior during the operation of this product.
This manual is organized ,compiled and released by SHENZHEN
ATTEN TECHNOLOGY CO., LTD. according to the latest product
features. We will not responsible for further notice of the
subsequent improvement of the product and this manual.
2.Disclaimer
Users are required to have basic knowledge of common sense
and electrical operations before using the product. Minors shall
use the product under the guidance of a professional or guardian.
3.Essential knowledge for users
This product is a portable, temperature-adjustable, high-
temperature control soldering iron. The ceramic heating
core uses a three-core grounded power cable to
effectively ensure the safety of the welding operation.
4.Product overview
*Automatically sleep after 10 minutes and shut down
after 20 minutes when the product stop operating
· Products use LCD display and LED display design
· Build in PID system equipped,adjust temperature
by button,operate easily .
· The handle structure is ergonomically designed for
comfortable grip.
· Display the temperature control status with a bright
blue LED.
· The heating wire and sensor are made of PTC material,
which is quick in temperature rise and precise in
temperature control.
· Auto-standby, auto-shut down is available.
· Using 3 cored power cable.
5.Features
ItemNo.
Voltage
Power
Temperature
range
Heater
Heating
indication
Temperature
unit
ST-2080
110/240VAC
80W
5set
adjustment
BlueLED
°C
ST-2150 ST-2080D ST-2150D
110/240VAC 110/240VAC 110/240VAC
150W 80W 150W
250°C~480°C
Four-core
PTCheater
250°C~480°C
Display
method
LED LED LCD LCD
°C ° °C/ F ° °C/ F
Temperature
accuracy
Temperature
stability
+
-
10℃
+
-
10℃
+
-
10℃
+
-
10℃
+
-
2℃
+
-
2℃
+
-
2℃
+
-
2℃
6.Specification
5set
adjustment
Four-core
PTCheater
Four-core
PTCheater
Four-core
PTCheater
BlueLED BlueLED
BlueLED
① ④ ⑤ ⑦ ⑧⑥② ③
①
②
③
④
⑤
⑥
⑦
⑧
Solderingtip
Stainlesssteeloutercasing
Shell
Minusbutton
Addbutton
Menubutton
LCDdisplay
3cordedpowercable
*Remark:ST-2080D/ST-2150D with LCD display.
(ST-2080D/ST-2150D)
Product feature
Operational Guide
A .Switch function
Charge on the product,short press power button,When
booting, the screen display the temperature, as shown
in picture 1; when shutdown,the screen display OFF,as
shown in picture 2
Picture 1
Picture 2
To Next Page
Need help?
General