EasyManua.ls Logo

ATTI Shadow Tracker Micro Vision User Manual

Default Icon
3 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Shadow Tracker Micro Vision Installation Instructions
Introduction
The Shadow Tracker Micro Vision system is a state of the art GPS vehicle Tracking
system. Combining Department of Defense global positioning system (GPS) information
with terrestrial based communication, The Shadow Tracker Vision gives users
unparalleled insight into their vehicles operations.
Connecting Power
The Tracking Unit must remain connected to a continuous power supply during vehicle
movement for accurate GPS collection and storage. The battery on the vehicle serves as
the power source for the Tracking Unit.
Power Connections
Red Lead: Connect to continuous 12-volt power source.
Black Lead: Connect to ground.
Blue Lead: Connect to 12-volt power source that is hot only
when ignition is on in the vehicle. This is only a sensor for
vehicle ignition activity
IMPORTANT: If a Unit is left on for an extended period in which the vehicle is not
running, the Unit may drain the vehicle battery to the point that the vehicle cannot be
started.
Mounting and Placement
Tracking Units are not weatherproof and are to be mounted inside the vehicle’s passenger
compartment. The recommended placement location is under the dashboard or in the
glove compartment, but the Unit may be placed anywhere inside the vehicle’s passenger
compartment, as long as it is kept out of direct sunlight and excessive moisture. .
GPS Antenna Placement
The GPS Antenna requires an unobstructed view of the sky to obtain GPS satellite
acquisition; therefore, antenna placement is critical to achieve consistent performance.
The GPS Antenna supplied with your Tracking Unit is equipped with a magnetic mount.
You may choose to mount the antenna out of sight. Keep in mind that the antenna will
obtain a stronger, less disrupted signal if it is mounted under plastic or glass rather than
covered by metal.
While external mounting is optimal, the options below
historical have been the best locations to install if you do not
want the drivers to know the location of the antennas.
Under the windshield defrost vents.
Between dashboard and instrument cluster.
Question and Answer IconNeed help?

Do you have a question about the ATTI Shadow Tracker Micro Vision and is the answer not in the manual?

ATTI Shadow Tracker Micro Vision Specifications

General IconGeneral
BrandATTI
ModelShadow Tracker Micro Vision
CategoryGPS
LanguageEnglish

Summary

Shadow Tracker Micro Vision Installation Instructions

Introduction

Overview of the Shadow Tracker Micro Vision GPS tracking system.

Connecting Power

Details on maintaining a continuous power supply for the tracking unit.

Power Connections

Specific instructions for connecting the red, black, and blue power leads.

Mounting and Placement

Recommended locations for mounting the tracking unit inside the vehicle.

GPS Antenna Placement

Guidance on positioning the GPS antenna for optimal signal acquisition.

Connecting the Unit

Verification

How to check the unit's operational status via its LED display.

Safety and Care

Essential guidelines for safe operation and maintenance of the tracking unit.

Care and Cleaning

Precautions for cleaning and maintaining the tracking unit.

Caring for the GPS Antenna

Regulatory Notices

Related product manuals