ATTIAS USA-60 User Manual

10 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

ATTIAS

MANUFACTURERS OF ATTIAS DOUGH MIXERS

COMMERCIAL DOUGH MIXERS

INSTALLATION AND OPERATING

INSTRUCTION MANUAL

MODEL# USA-60

MODEL# USA-80

Table of Contents

Questions and Answers:

K
Kyle MccartyAug 2, 2025
What to do if my ATTIAS USA-60 will not start?
- A
  Alexis RoyAug 2, 2025
  If your ATTIAS Mixer won't start, there are several potential causes: * The gear shift lever might not be fully engaged. Ensure it is properly positioned between gears. * The circuit protector could be open. Check the fuse or disconnect switch. * The mixer or attachment might be overloaded. Try reducing the load. * The bowl may not be raised all the way up. Make sure it is fully raised. * The Wire Cage Assembly might not be in the correct position. Adjust it to the front-center.
J
Jeff WoodwardAug 13, 2025
Why does the agitator touch the bowl of my ATTIAS USA-60 Mixer?
- K
  Keith ShannonAug 13, 2025
  The agitator may touch the bowl of your ATTIAS Mixer due to a few reasons: * The bowl clamp(s) may not be closed properly. Make sure they are securely closed. * The agitator clearance might be improper. Refer to the MAINTENANCE section for adjustment procedures. * The bowl clamp(s) may be improperly adjusted. Refer to the MAINTENANCE section for the correct adjustment procedure.
D
dianamillerAug 22, 2025
How to fix a squeaky planetary seal on my ATTIAS USA-60 Mixer?
- W
  William CarterAug 22, 2025
  If the planetary seal on your ATTIAS Mixer is squeaking, it likely needs lubrication. Lubricate the seal as required. Refer to the MAINTENANCE section for more details.

ATTIAS USA-60 Specifications

General

Brand	ATTIAS
Model	USA-60
Category	Mixer
Language	English

Summary

Installation

Unpacking

Checking for damage after unpacking and contacting the carrier.

Electrical Connections

Warnings about complying with electrical codes and disconnecting power.

Changing Speeds

Mixing

Agitator

Installing an agitator after the bowl is installed and lowered.

Attachments

Installing and operating various attachments, including specific instructions for chopper.

Cleaning

Maintenance

Lubrication

Checking planetary oil level and adding lubricant if needed.

Transmission

Checking and filling transmission oil to the correct level.

Adjustments

Agitator Clearance

To Adjust the Bowl/Agitator Clearance

Troubleshooting