EasyManua.ls Logo

AUDAC CMP30 - Front Panel Controls - Part 4

AUDAC CMP30
17 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
10. Band select for the tuner (BAND):
Tuner mode:
Press this button to select between the different tuner bands. The different tuner bands are
FM1 – FM2 – FM3 – MW1 – MW2, and can be cyclically selected in this order by pressing the
BAND button.
CD, USB & SD/MMC mode:
Press this button to display the information of the ID3 tag of the current track.
(Folder – File – Title – Artist – Album)
Press and hold: By pressing and holding this button, the loudness can be switched On
and Off.
11. Equalizer select (Flat / Classic / Pop / Rock / Off ) (EQ):
Press this button to toggle between the equalizer settings: Flat – Classic – Pop – Rock - Off
12. Search down (DIR -):
CD, USB & SD/MMC mode:
Press this button in MP3 mode to jump to a lower folder.
Tuner mode:
Press and hold:
By pressing and holding this button, the current chosen radio frequency will be stored on
‘Position 5’ of the selected Band.
Press short term:
Press this button in tuner mode to select the previous programmed preset frequency.
13. Search up (DIR +):
CD, USB & SD/MMC mode:
Press this button in MP3 mode to jump to a higher folder.
Tuner mode:
Press and hold:
By pressing and holding this button, the current chosen radio frequency will be stored on
‘Position 6’ of the selected Band.
Press short term:
Press this button in tuner mode to select the next programmed preset frequency.

Other manuals for AUDAC CMP30