BLUETOOTH® pairing is a one-time procedure. Once paired via BLUETOOTH®,
your phone will automatically connect when you start your vehicle and your
phone’s contacts automatically synchronize, allowing you to retrieve
contacts and make and receive calls through the infotainment system.
To pair a phone:
1. Switch ignition to accessories mode and turn on the Audi concert radio.
2. Activate your phone’s BLUETOOTH® function and set to Pairing or Search mode.
TEXT A5PAIR2 to 38981
Do not text and drive. Message and data rates may apply.
For more information regarding phone compatibility visit audiusa.com/bluetooth.
BLUETOOTH
®
Pairing:
Audi concert radio
Initial Setup
11
3. Select Audi UHV when it
appears on the phone’s
screen.
4. Enter default PIN 1-2-3-4
and press Pair.
5. The phone is now paired
and your contacts will be
synchronized.
NOTE: See your phone’s owner manual for
specific BLUETOOTH® activation instructions.
12
Important Safety Instructions and Warnings which you must read, are listed on the last panel under BLUETOOTH® Pairing.
BLUETOOTH®
Pairing
To Next Page
Loading...
Need help?
General
