Need help?Do you have a question about the Audi A8 and is the answer not in the manual?
General| Brand | Audi |
|---|---|
| Model | A8 |
| Category | Automobile |
| Language | English |
Identifies the main Audi A6/A8 video interface unit included in the kit.
Identifies the RGB cable included in the interface kit.
Identifies the LVDS In cable included in the interface kit.
Identifies the power cable included in the interface kit.
Identifies the AV IN/OUT cables included in the interface kit.
Identifies the IR extension cord included in the interface kit.
Identifies the remote controller included in the interface kit.
Details the wire connections for AV input/output, including audio and video signals.
Details the wire color coding for the RGB signal, including R, G, B, Sync, and GND.
Details the wire connections for the power cable, including GND, +12V, and reverse signal.
Explains the functions of the remote control buttons like PWR, AV, OSD, SEL, and CON.
Instructions for removing the glove compartment to access the installation area.
Guidance on placing the MMI system within the glove compartment for inner installation.
Identifying A and B connectors on the MMI module for safe disconnection.
Connecting the NAV button switch wire to the 16-pin wire for source selection.
Connecting the LVDS In cable to the interface's 'LVDS Out' and MMI control module.
Warning to re-plug the MMI power cable (B connector) as the final installation step.
Instructions on using the factory NAV button to switch between connected A/V sources.
To Next Page
