AV1 / AV2 / V3 / AV OUT/ Audio out R/
Audio out L
AV IN/OUT
RGB
Black wire: GND Yellow wire: Nav button switch
Red wire: +12V White wire: no use
Blue wire: reverse +12 V
Remote controller
Red wire: R Yellow wire: Sync
Green wire: G Black wire: GND
Blue wire: B
PWR: power
AV: select main menu/RGB/AV1/AV2/AV3
OSD: function key, to set up program and adjust
picture
SEL+/SEL-: move between main menu and sub menu
CON+/CON-: select menu and change picture value
Power cable
To Next Page
Loading...
Need help?
General
