Doors and windows 53
Controls Safety Driving tips General maintenance Self-help Technical data
WARNING
Take care when closing the tilting panorama roof. Careless or
uncontrolled use can cause injuries. For this reason, always take
out the ignition key when leaving the vehicle.
Applies to vehicles: with tilting panorama roof
Closing the tilting panorama roof manually
– Take the screwdriver out of the vehicle tool kit
⇒ page 255.
– Remove the screw ⇒ fig. 48 -arrow- from the light
housing.
– Carefully pull out the light housing.
– Remove the fuse box cover ⇒ page 272 ⇒ page 272,
fig. 253 on the driver's side.
– Take the crank handle from its mounting.
– Insert the crank handle all the way into the hexagonal
socket ⇒ fig. 49.
– Hold the crank in position and turn it to close the sun
roof.
– Re-install the complete light housing.
– Have the fault rectified.
Note
To make it easier to turn the crank, you can make use of the screw-
driver handle. Detach the handle from the screwdriver and then fit
the handle onto the crank.
Fig. 48 Detail of head-
liner: Unscrewing the
light housing
Fig. 49 Detail of head-
liner: Crank for manual
operation
document_0900452a8179700c.book Seite 53 Donnerstag, 22. März 2007 10:19 10
To Next Page
Loading...
