Audi A6 2011 - Page 20

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Take care not to damage the red warning label on the housing
cover of the high-voltage connections.
First remove high-voltage wires on electric drive motor - V141-
⇒ page 43 .
– Remove electric drive motor - V141- ⇒ 8-speed automatic
gearbox 0BW (hybrid, front-wheel drive); Rep. gr. 38 ; Electric
drive motor - V141- ; removing and installing electric drive mo‐
tor - V141- .
Installing
– Remove electric drive motor - V141- ⇒ 8-speed automatic
gearbox 0BW (hybrid, front-wheel drive); Rep. gr. 38 ; Electric
drive motor - V141- ; removing and installing electric drive mo‐
tor - V141- .
WARNING
Working on vehicles with high-voltage wiring:
• Do not support yourself or tools on high-voltage wiring or
associated components --> this can damage the insula‐
tion.
• High-voltage wiring must not be excessively bent or
kinked --> this can damage the insulation.
• The round high-voltage connectors are colour-coded with
an external coloured ring and are provided with mechan‐
ical coding or guide lugs. It is important to observe this
coding when joining up the round high-voltage connec‐
tors, otherwise the connectors can be damaged.
Audi A6 2011 ➤ , Audi A6 Avant 2011 ➤
Electrical system, hybrid - Edition 03.2014
16 Rep. gr.93 - Electric drive systems