Audi AMB - Page 108

 After replacing, fill with fresh coolant
3 - Oil deflector
 Note installed position
4 - Cylinder head bolt
 Replace
 Note sequence when loosening
 Note sequence when tightening
5 - Cylinder head cover
 Removing and installing --> Cylinder head cover, removing and installing
6 - Ignition coil
7 - Cap
8 - Gasket
 Replace if damaged or leaking
9 - 10 Nm
 Tighten inner nuts first
 Tighten outer nuts in diagonal sequence
10 - Cylinder head cover gaskets
 Replace if damaged or leaking
 Before installing gaskets apply AMV 174 004 01 at sealing points Sealing transition points between
double bearing cap and cylinder head (2 points): and Sealing camshaft adjuster/cylinder head
transition (4 points)
11 - Gasket
 Replace
12 - Secondary air combination valve
 With screw connection
13 - 10 Nm
2005 Audi A4 Quattro
ENGINE 1.8 Liter 4-Cyl. 5V Turbo Engine Mechanical, Engine Code(s): AMB
1:01:00 AM Page 96
cardiagn.com